PIM+ Type S container
Since 1997

PIM+ Type S

Deeper penetrating concrete treatment

PIM+ Type S is a water-based, colorless, odorless, ready-to-use, penetrating permanent treatment for all permeable concrete. A one-time, soaking application will produce an internal, breathable, silicate/glass-impregnated layer 6 mm (1/4 inch) or more deep.

Find a distributor

Benefits

  • Permanently waterproofs, stopping water absorption
  • Permanently stops up to 98% of moisture vapor beneath coatings
  • Increases hardness of concrete
  • Reduces damage from rain, pressure washing, de-icing salts, and wear due to abrasion
  • Increases the life of concrete surfaces
  • Is water-based and not flammable

Application details

  • Wear gloves and eye protection when applying; see the safety data sheet
  • Is best applied with a pump-up hand sprayer
  • Coverage is about 750 sq. ft. per 20L pail
  • Best applied at least 21 days after concrete pour
  • Safe for foot traffic after dry
  • Curing time is 72 hours

Concrete protection.
Inside and out.

PIM+ Type S treats the concrete internally. PTS+ adds a protective surface coating. Explore how the two treatments work together.

Look at the surface.

No treatment: A darkened area is visible on the surface.PIM+: Internal treatment without a surface coating.PIM+ + PTS+: Water beads are visible on the surface.

Untreated

No treatment

A darkened area is visible on the surface.

Internal treatment

PIM+

Internal treatment without a surface coating.

Internal + surface

PIM+ + PTS+

Water beads are visible on the surface.

Illustrative specimen comparison. Close-ups use the same supplied images. The internal treatment shown is PIM+.

Open original photograph (opens in a new tab)

These images illustrate surface water behaviour; they do not establish wear resistance or service life.

Internal treatment.
Surface protection.

PIM+ Type S treats the concrete internally.
Follow with PTS+ after curing.

PIM+ Type S internally PTS+ at the surface
PIM+ Type S + PTS+: internal and surface protectionIllustrative cutaway. Pores, treatment depth and colours are not to scale. PTS+ dries clear.

Two products. One system.

PIM+ Type S treats the concrete internally. After it cures, PTS+ adds a clear, non-glossy, water-repellent surface coating.

  • Farming infrastructure; bunker silos, dairy parlors, barn floors
  • Bridge decks and structures, parapets
  • Concrete driveways and paving stones
  • All concrete surfaces and structures

Downloads

Material safety data sheet

Download in: PIM+ Type S material safety data sheet – English (PDF, opens in new tab) PIM+ Type S material safety data sheet – French (PDF, opens in new tab)

Technical data sheet

Download in: PIM+ Type S technical data sheet – English (PDF, opens in new tab) PIM+ Type S technical data sheet – French (PDF, opens in new tab)

Application guide

Download in: PIM+ Type S application guide – English (PDF, opens in new tab) PIM+ Type S application guide – French (PDF, opens in new tab)

Questions about this product?

Find a DynaCrete® distributor in your area to purchase PIM+ Type S

Find a distributor
Or contact us directly at
+1-866-751-7746